|
|
|||||
Step 3 |
|||||
 |
|
 |
To begin the thread pattern I use regular masking tape and make one revolution around the blank at the grip end (top photo). On the next turn around the blank, I twist the tape over on itself so the sticky side is exposed and insert a piece of soda straw under this wrap and subsequent wraps of the tape (second photo). The soda straw at the base of the rod and adjacent to the reel seat is the 0 degree axis for the wrap; in other words, the side the angler will see (third photo). Repeat this step at the tip end of the rod, but place the soda straw on the 180 degree axis (bottom photo). This will help you maintain the line of thread and will also provide a constant reference point for the cross-overs of the thread. The next photo illustrates this layout technique. |
||
